Filter
Top Products
Need help? Call
1-888-533-7135
5
Need help? Call
1-888-533-7135
5
PREPARATION
INSTALLING BATTERIES
Your remote control requires two AAA batteries (not
supplied) for power. For the best performance and
longest life, we recommend alkaline batteries such
as RadioShack Cat. No. 23-555.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Do not mix old and new batteries or different
types of batteries.
• Do not press any of the remote control’s keys
while installing batteries.
Note:
The remote control’s built-in memory backup
saves any programmed codes for about a minute af-
ter the batteries have been removed. We recom-
mend you have fresh batteries ready to install as
soon as you remove the old ones.
1. Press the battery compartment
cover’s tab and lift off the cover.
2. Place the batteries in the com-
partment as indicated by the
polarity symbols (+ and
–
)
marked inside.
3. Replace the cover.
When the remote control’s range decreases or it
stops operating properly, replace the batteries.
15-1930.fm Page 5 Monday, July 19, 1999 1:09 PM