Filter
Top Products
OWNER’S MANUAL
Installing Batteries 3
1. Push down on the indent marks on the
battery door (located on the back of the
remote) and lift off the cover.
2. Place the AA batteries in the
compartment as indicated by the
polarity symbols (+ and -) marked
inside.
3. Align the cover with the compartment
opening and replace it.
4. If batteries are inserted correctly, the
display will turn on and show all keys after
any key is pressed.
NOTE: Replace the batteries if one of the
following conditions occurs:
1. The top IR segment flashes five times
after pressing a key.
2. The Tilt Switch (if enabled, see “Enabling
the Tilt Switch” on page 12) no longer
activates the remote and only pressing a
key turns on the display.
❶
❷❷
❸
RS 4in1 Kam User Manual.fm Page 3 Friday, March 4, 2005 9:09 AM