Filter
Top Products
TV Jacks Explanation
ANT/CABLE: Connect to receive the signal from your antenna or cable via coaxial cable.
Head phone:
Connect a 3.5mm headphone for personal audio.
Digital Audio-out:
Connect a coaxial cable for digital audio output.
AUDIO OUTPUT L/R:
Connect double-channel coaxial cables for analog audio output.
AUDIO-IN L/R, Video In: Connect an AV device that has composite video jacks, such as a VCR
• AUDIO-IN L: Left audio channel connection. The left audio connector is usually white. For mono audio
sources, be sure to use the left AUDIO INPUT.
• AUDIO-IN R: Right audio channel connection. The right audio connector is usually red.
COMPONENT 1,2 Y/Pb/Pr:
Connect a device that has component video jacks, such as a DVD player.
• Y/Pb/Pr (Component Video): They provide good picture
quality because the video signal is separated into three components.
Use three video-grade or component video cables for the connection. When using Y/Pb/Pr, make sure you connect left and
right audio cables to the Audio L and Audio R jacks.
HDMI1, 2, 3: (High-Definition Multimedia Interface) It provides an uncompressed digital connection that carries both video and audio
data by way of an integrated mini-plug cable.
PC INPUT VGA: Connect your computer or other device with a VGA output to this jack using a 15-pin, D-sub cable.
PC INPUT Audio-In: Use to obtain sound when a PC is connected to TV. Use 3.5mm stereo mini-pin cable to connect PC to TV.
SERVICE: For service use only. Do not connect any device.
AC-IN: AC power input.
or a DVD player. To access device connected to these jacks, press the INPUT button on your
remote; then press the up/down arrow to select AV. Press the ENTER button at last to confirm.
To access device connected to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down arrow to
select Component1 or Component2. Press the ENTER button at last to confirm.
Note:
•
The AV input (Video In), COMPONENT 1 input (Y, Pb, Pr) share the same audio input jacks-AUDIO-IN L/R.
Note:•
Digital Audio-out and AUDIO OUTPUT L/R are supposed to be connected to audio power
amplifer, which provides smoother and more powerful sound performance.
14
AC-IN
1
2 3
VGA
ANT/
CABLE
HEAD
PHONE
Y Pb Pr
R
R
L
R L
L
Audio-In
SERVICE
Y Pb
Pr
PC INPUT
NI
COMPONENT 1 AUDIO-IN
Digital
Audio-out
Video
In
AUDIO
OUTPUT
COMPONENT 2