Filter
Top Products
Chapter 2 15
Menus and Features
SETUP
Language English
Screen Saver On
Demo
Clock 16:29
. On Screen On
Alarm Off
. Time 00:00
. Channel 5
Closed Caption CC1
Reception Use the VOL + or VOL – buttons to select the type of input signal
you connected to the antenna jack on the back of your TV.
Auto Automatically detects the type of input signal you’re using (cable or
antenna).
Antenna Choose this option if you have an off-air antenna connected to
the antenna jack on the back of your TV.
Cable Choose this option if you have a cable feed connected to the
antenna jack on the back of your TV.
Autostore Press VOL + to start the Autostore channel search, which places all
active channels into memory.
Setup Menu
Closed Caption Lets you choose which captioning mode is used for
displaying captioning information. Use VOL + and VOL – to select from the
following nine choices:
Off No closed captioning is displayed.
CC1 Displays the primary captioning information in the primary language.
CC2, CC3, CC4 Displays the secondary captioning information.
Text 1-4 Displays captioning information in text mode.
Note: The Text modes cover nearly half of the picture on the screen
to display the closed-captioned text. Most broadcasters use the CC
mode, which displays a few lines of captions at a time.
Language Use VOL + and VOL – to select your preferred language for the
menus: English or Spanish.
Screen Saver Your TV has a built-in screen saver that appears when there is
no signal present in order to prolong the life of your TV. Use VOL + and VOL –
to toggle between On and Off.
Demo Starts a demonstration of the TV’s main features. Press VOL + to start the
demonstration.
Clock Lets you set the clock. Use the number buttons on the remote to enter
the current time.
On Screen Displays the time in the channel banner everytime you change
channels. Use VOL + and VOL – to toggle between On and Off.
Alarm Turns the TV on automatically at a set time on a set channel. Use the
VOL+ and VOL – buttons to toggle between On and Off.
Time Use the number buttons on the remote to enter the time you want
the TV to turn on automatically.
Channel Use the number buttons or VOL + and VOL – to select the
channel to which you want the TV to tune when it turns on automatically.
Note: The TV turns off automatically if it remains inactive for five
minutes immediately after being turned on by the alarm.