Filter
Top Products
Graphics contained within this publication are for representation only.
39
Chapter 4: Playing Discs
Using Different Menus
Each disc is programmed with different features. There are three separate types of menus that you can
use to access features:
• The Disc menu – The Disc menu is part of each disc and is separate from the DVD/VCR’s menu.
The contents of each Disc menu vary according to how the disc was authored and what features
are included.
To make the Disc menu appear, press the MENU button while the disc is playing.
• The DVD/VCR’s Info Display – The Info Display appears as icons across the top of the screen
when a disc is playing. It can only be accessed while you are playing a disc. It’s turned on and off
with the INFO button on the remote. The Info Display icons change based on the type of disc
you’re playing. Go to page 40 for more information.
• The DVD/VCR menu – If you’re playing a disc, press STOP (the DVD/VCR’s menu appears
automatically).
Remember: A feature will only work if the disc was programmed with that feature. For
example, if you choose subtitles on the Info Display, the subtitles will only appear if the disc
was created with subtitles. If a menu or icon is “grayed out” it means that item (or feature)
isn’t available.
Search Options
Picture Scan
To search a disc during playback, use the FORWARD or REVERSE button. Each time you press
FORWARD or REVERSE, your DVD/VCR scans the disc faster until you reach the fastest scan speed.
To resume normal playback, press PLAY.
Note: Many DVD titles are programmed to prohibit skipping of warnings or credits so that you
can’t fast forward through them.
Freeze Frame and Frame Advance
While a disc is playing, press PAUSE to freeze the picture. To advance one frame at a time, press PAUSE
again (the on-screen icon changes from PAUSE to FRAME). Each time you press the FORWARD or
REVERSE button, the picture goes to the next (or previous) frame. To resume normal playback, press
PLAY.
Slow Motion (in Freeze Frame Mode) – DVD discs only
While a disc is playing, press PAUSE. Press REVERSE or FORWARD (each time you press REVERSE or
FORWARD the slow motion will get a little faster until you reach the fastest slow motion speed). To
resume normal playback, press PLAY.
Time Search – DVD and VCD discs only
Make sure the Time Display (top left side of the Info Display) is highlighted, and then use the number
buttons to enter a specifi c time on the disc that is playing. Go to page 41 for more information about
the Time Display.
Quick Fast Forward and Quick Reverse – DVD and Audio CD only
While you’re playing a disc, press the AGAIN button on the remote (the disc automatically repeats the
last 10 seconds of the movie).
Similarly, press the ADVANCE button to go forward approximately 30 seconds.
Playback options
Many of your DVD/VCR’s playback features are accessed through the Info Display (described on pages
40 through 44). Additionally, with some discs you can use the Zoom Feature to see details of an image.
Zoom
1. While you’re playing a disc, press ZOOM (the player zooms in on the image). Each time you press
ZOOM, the picture is magnifi ed even more (until you get to the maximum zoom level).
2. To see other parts of the picture when you’ve zoomed in on the image, press the up, down, left,
and/or right arrow buttons to go in corresponding directions.
Watch TV
Disc
Disc Library
Timers
Setup
Live - Ch 2
No Disc
1 Library Disc(s)
10:49 am Thu 17-Mar 2003
To watch TV, press OK.
GO
BACK
VOL CH
MUTE
TV
ON-OFF
DVD/VCR CABLE
AUX
AUDIO
CLEAR
MENU
OK
LIVE
RECORD
STOP
PLAY
INPUT ANTENNA
PAUSE
FORWARDREVERSE
7
123
4
5
6
8
0
9
ADVANCE
AGAIN
INFOTIMER•GUIDE
SAT
ZOOM ANALOG
DIGITAL
OPEN
CLOSE
ANGLE
PAUSE button
ZOOM
button
AGAIN
button
REVERSE
button
ADVANCE
button
FORWARD
button