RCA DRC616N DVD Player User Manual


 
21
Graphics are for representation only. Your unit may differ slightly.
Menu System
Display Mode
The Display Mode option can only be modified when the TV Aspect option is set to 4:3.
The two options included in the Display Mode are Letterbox and Panscan.
Letterbox – Choose this option if you want to see
movies in their original aspect ratio (height-to-width
ratio). You’ll see the entire frame of the movie, but it
will take up a smaller portion of the screen vertically.
The movie might appear with black bars at the top and
bottom of the screen.
Panscan – Choose this setting if your DVD Player is
connected to a standard TV. If you choose this setting and
you don’t have a widescreen TV, the images on the screen
might appear distorted due to vertical compression. If you
play a disc recorded in 4 x 3 format on a widescreen TV,
the left and right side of the screen will appear black.
The AUDIO Menu
The AUDIO menu lets you adjust the player’s settings to match the equipment you connected
to your DVD Player and to use the DVD Player’s sound features. The
AUDIO settings are
Dolby Digital*, DTS, Sample Frequency, and Digital Output.
Dolby Digital and DTS
The Dolby Digital and DTS options are Bitstream and
PCM. Dolby Digital i
ndicates the Dolby Digital output
mode and
DTS indicates the Digital Cinema output
mode.
1. With the player on, press SETUP (menu system
appears).
2. Use the4button to highlight the AUDIO icon.
3. Use the5or6buttons to highlight your choice
(options explained below).
4. Use the4button to highlight the setting of the
item. Press ENTER to select.
5. To return to the previous menu, press the3button
if necessary. To remove the menu from the screen,
press SETUP.
AUDIO
DTS
Sample Freq.
Digital Output
Dolby Digital
PCM
Bitstream
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
DRC616Book 21DRC616Book 21 11/4/04 10:30:16 AM11/4/04 10:30:16 AM