RCA DRC616N DVD Player User Manual


 
22
Graphics are for representation only. Your unit may differ slightly.
Menu System
Bitstream – Choose this option when the DVD
Player is connected to an amplifier with a built-in DTS
decoder, Dolby Digital decoder, MPEG decoder, or
other audio equipment with digital audio output jack.
PCM – Choose this option when the DVD Player
is connected to dual stereo digital audio equipment.
When the DVD disc being played is recorded with the
Dolby Digital, MPEG1/MPEG2 recording systems, the
DVD Player selects PCM as the audio output.
Sampe Freq.
Sample Freq. provides the 48khz and 96khz options for
processing the digital input with sampling frequency at
96 kHz.
When a connected receiver or amplifier is incapable
of processing digital input with sampling frequency at
96khz, the DVD Player selects 48khz and automatically
converts the 96khz singal into the 48khz signal. On
the other hand, if the receiver or amplifier is capable
of outputting digital signals at 96khz, the DVD Player
selects 96khz and processes all signals.
Digtal Output
Digital Output is turned ON to enable the Dolby Digital,
DTS, and Sample Freq. features.
AUDIO
DTS
Sample Freq.
Digital Output
Dolby Digital
96KHZ
48KHZ
Prev. Move Enter
AUDIO
DTS
Sample Freq.
Digital Output
Dolby Digital
PCM
Bitstream
AUDIO
DTS
Sample Freq.
Digital Output
Dolby Digital
ON
OFF
Prev. Move Enter
DRC616Book 22DRC616Book 22 11/4/04 10:30:17 AM11/4/04 10:30:17 AM