Filter
Top Products
Connections & Setup
Chapter 1 13
Switched e TV can be turned on or off; Sleep Timer, Schedule and Energy Saver can be enabled. is is the default setting.
Energy Saver When enabled, this feature turns the TV off after a specified period of inactivity (no remote or front panel button presses).
You can toggle between Disabled, 2-hour, 1-hour, and 30-minute settings. Disabled is the default setting. If TV Power is set to On Always,
Energy Saver settings are ignored. A warning message will be displayed prior to the TV shutting off.
Front Panel is setting determines whether the front panel buttons are active (able to be used to control the TV) or not.
Note: When Front Panel is set to Disabled, the MENU button on the master remote turns on the TV.
Parental Controls is feature determines the amount of access basic users have to Parental Controls. Blocking age-based rating and
content themes is described in Chapter 3. Choose between:
Basic & Password Basic users are able to enter the Parental Control menu and change the password. Basic users can watch blocked
programming by entering the system password. is is the default setting.
Basic Basic users are able to enter the Parental Control menu but cannot change the password. Basic users can watch blocked
programming by entering the system password.
No Basic Parental Control does not appear on the basic Main menu. Basic users can watch blocked programming by entering the
system password.
If Parental Controls is set to No Basic, Movie Rating Access, TV Rating Access, Unrated Program Block, and Channel Block will not be
available to basic users, regardless of what those items have been set to individually in the Parental Controls menu.
Minimum Standby Power When enabled, keeps power consumption levels compliant with ENERGY STAR
®
guidelines. e TV is
shipped with this enabled.
Note: Min Stby Power must be disabled to use the DSCI port.
Legacy Mode When turned On, allows the TV to work with earlier DSCI versions. us making the set usable with older DSCI systems.
Off is the default setting.
Info Menu Allows the Master user to set whether the channel information is displayed when the INFO button is pressed on the remote.
Channel Guide Allows the Master user to determine whether the Channel Guide is displayed by pressing the GUIDE button on the
remote. e default is On.
Ignore PSIP When enabled, Digital Tuning ignores all PSIP data including virtual channel remapping. is allows the DSCI device to
tune channels by the physical frequency. is option should be activated (the box has a check mark) when a DSCI device is attached.
Note: Your digital channel lists can be cleared when you change the Ignore PSIP status. Perform a digital channel search after
changing this option.