Filter
Top Products
Connections & Setup
Chapter 1 7
J27F636
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
DIGITAL INPUT
DSCI
Port
Additional Jacks and Cables
S-Video Jack
TV ANT
Digital Audio
Out Jack
Phone Jacks
Y P
B
P
R
S-Video Jack
TV ANT
Digital Audio
Out Jack
Phone Jacks
Y P
B
P
R
S-Video Jack
TV ANT
Digital Audio
Out Jack
Phone Jacks
Y P
B
P
R
DSCI
Port
TV ANT
What You Need to Know
• Visit www.antennaweb.org to get help deciding what type of antenna to use to receive the local analog channels available to you. By
entering where you live, this mapping program tells you what local analog and digital stations are available using a certain antenna.
• When you get to the Auto Channel Search menu in the Initial Setup, make sure you set the Signal Source to Analog. (You can also
choose Both for digital and analog). en set the Signal Type. Choose Antenna or Cable (depending on your connection). To complete a
channel search now, go to page 9.
• When you are ready to watch analog channels, make sure you are tuned to the analog input. Press the ANTENNA button to tune to
the analog input. (Look for a A at the bottom of the channel banner). Go to page 24 for more information.
What You Need
• Antenna (“rabbit ears”) or outdoor antenna with coaxial cable. Plug the antenna or coaxial cable from
the wall outlet into the ANTENNA/CABLE ANALOG INPUT to receive analog channels.
OR
• Coaxial cable from a cable outlet. Plug the coaxial cable from the source outlet into the ANTENNA/
CABLE ANALOG INPUT to receive cable channels.
OR
Receiving Analog Channels
Coaxial cable
Indoor or Outdoor
Antenna
When using the ANTENNA/CABLE ANALOG INPUT and/or the ANTENNA/
CABLE DIGITAL INPUT jacks, use the ANTENNA button on the remote to
toggle between the digital and analog signals.
VIDEO 1
VIDEO, AUDIO R and L/MONO INPUTS Used to connect components such as a VCR, DVD
player, camcorder, or video game consoles with audio/video outputs. ese jacks are used for most
audio/video connections between components.
Note: If your component has only one input for audio (mono), connect it to the left
(white L/Mono) audio jack on the TV and don't connect the right audio part of the cable.
• R (RIGHT) AUDIO Provides right audio connection. e right audio cable is usually red.
• L
(LEFT)
/MONO AUDIO Provides left audio connection. e left audio cable is usually
white.
• VIDEO Provides composite video connection. e video cable is usually yellow.
• S-VIDEO Provides better picture quality than the video jacks because the color part of the
signal is separated from the black and white part of the picture. When using S-VIDEO IN,
make sure to connect left and right audio cables to the L/MONO and R AUDIO Input jacks
(an S-Video cable is required).
DSCI PORT is port is used to transfer information between a TV and other devices, such as a
clone box or interactive system. is port is an eight-pin telephone-type port. When the TV receives
a message via the DSCI (digital serial communications interface) port, it will act in accordance with
the digital instructions received. For more information on its connection and operation, please
contact your distributor or the supplier of the interactive system.
ANTENNA
button