Filter
Top Products
Connections & Setup
8 Chapter 1
The Front of Your TV
Front Input Jacks
The TV has front input jacks for your convenience: one set of audio/video
inputs, an s-video and a headphone jack. These jacks are towards the
front of the TV on the side. To access the component you connected to
the front of the TV, press the INPUT button on your remote until FRNT
appears on the screen. The jacks are ideal for connecting a video game
console or a camcorder.
Note: When connecting a component that only has one audio jack,
such as some camcorders, use the TV’s AUDIO L/MONO jack to hear
the audio.
H-PHONE Allows you to connect headphones to listen to the sound
coming from the TV.
L/MONO and R AUDIO Receives audio from another component such
as a VCR, camcorder, or video game console.
VIDEO Receives video from another component such as a VCR,
camcorder, or video game console.
S (S-Video) if equipped Provides better picture quality when receiving
s-video from another component. When using S-VIDEO IN, make sure to
connect left and right audio cables to the L/MONO and R AUDIO Input
jacks (an S-Video cable is required).
Front Panel Buttons
If you cannot locate your remote, you can use the front panel buttons of your TV to operate many of the TV’s features.
MENU/OK Brings up the Main menu. In the menu system, it selects highlighted items.
CH v Scans down through the current channel list. In the menu system, acts like the down arrow button on the remote
control and adjusts menu controls.
CH Scans up through the channel list. In the menu system, acts like the up arrow button on the remote control and
adjusts menu controls.
VOL < Decreases the volume. In the menu system, acts like the left arrow button on the remote control and adjusts menu controls.
VOL > Increases the volume. In the menu system, acts like the right arrow button on the remote control and adjusts menu controls.
POWER Turns the TV on and off.
Start-up
The steps below get your TV connected and ready to watch.
Plug in the TV and Turn it On
Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into the outlet. Press POWER on the
TV or remote.
Put Batteries in the Remote
1. Slide off the cover of the battery compartment.
2. Place the two AAA batteries into the remote, matching the + and – end of each battery in the compartment.
3. Replace the cover.
v
MENU/OK
VOL
CH
CH
VOL
POWER
READY
ADVISORY
WA
TCH
WARNING
VIEW
MESSAG
E
STOP
ALAR
M
HEAR
VOICE
L/MONO
AUDIO
VIDEO
R
H-PHONE
1644105Ae.indb 8 7/18/05 2:27:14 PM