Filter
Top Products
Connections & Setup
12 Chapter 1
Picture Menu
The Picture menu items allow you to adjust the appearance of on-screen
images for each video input source. Scroll to the feature you want to set.
Use the right arrow button to change the setting.
Go Back Takes you to the previous menu.
Picture Preset Choose between Soft, Natural, Bright or Personal. The
default setting is Natural.
Auto Color Allows you to set the auto color to On or Off. The default
is Off.
Color Warmth Choose between Cool, Normal or Warm. The default
setting is Normal.
Brightness Adjusts the brightness of the picture.
Color Adjusts the richness of the picture.
Contrast Adjusts the contrast of the picture.
Sharpness Adjusts the sharpness of the picture. When the component
inputs are used, this selection is grayed out (disabled).
Tint Adjusts the balance between the red and green levels of the
picture.
Tilt (model J32F635 only) Sets the angle of the TV’s picture. The right
arrow button rotates the picture clockwise. The left arrow button rotates
it counterclockwise. When set by the master user, the setting is used the
next time the TV is turned on.
Go Back
Picture Preset Bright...
Auto Color
Color Warmth Normal...
Brightness
Color
Contrast
Sharpness
Ti
nt
Ti
lt
PICTURE
ACCESS AND POWER OPTIONS
Go Back
Remote Config. TV1....
Basic Menu Access Enabled...
TV Power On Always....
Energy Saver Disabled...
Front Panel Enabled...
Parental Control Basic...
Min Stdby Power Enabled...
Legacy Mode
Access and Power Options Menu
The Access and Power Options menu allows the master user to specify
which features and functions basic users will be able to access. Scroll
to the feature you want to set. Use the right arrow button to change the
setting.
Go Back Takes you to the previous menu.
Remote Config
. (Configuration) This feature allows the master
user to determine which TVs the remote operates. Choose from TV1,
TV2, TV3, TV1&2, TV1&3, TV2&3, All or Disabled. The default setting is
All. If Disabled is chosen, the TV will not respond to the basic remote,
except when MENU from the master remote has been pressed.
Note: Although the TV supports TV3, the master remote cannot
be programmed for it.
Basic Menu Access This setting allows you to determine whether the
TV's basic menus are accessible. Choose Enabled or Disabled. When the
basic menu is disabled, users cannot access menus through the basic
remote or front panel.
TV Power This setting allows you to determine whether the TV can
be turned on or off with the POWER button on the remote or the front
panel. Choose between:
Note: The Sleep Timer, Schedule and Energy
Saver settings are unavailable when On
Always has been activated, even if they were
set prior to choosing this option.
1644105Ae.indb 12 7/18/05 2:27:25 PM