Filter
Top Products
Using the Menu System
28 Chapter 4
Graphics contained within this publication are for representation only.
Setup
Signal Type Cable. . .
Auto Channel Search Start. . .
Autotuning. . .
Channel List. . .
Press </> to select.
Press MENU to go to Main Menu.
Menu Time-out Set how long you want the menus to appear on-screen (starting at 10 seconds
up to 180 seconds) by pressing the left or right arrow button.
Menu Position Select where you want the menu to appear on the TV.
Menu Background Select the appearance of menu background: Opaque for a solid
background; Translucent for a see-through background.
Channel List
Channel number _ _ _
In List Yes. . .
Press digit keys to enter a channel number.
Press MENU to go to Setup menu.
Timers Displays the Timers menu. The Timer options are:
Sleep Timer Lets you set the TV to turn off after a given time.
Press the right arrow button to add 30 minutes to the clock (up to
150 minutes).
Current Time Lets you to set the time. If it is 8:25, for example,
you must first press the number 0 on the remote, then number 8,
then 2 and then 5. Press the OK button to choose between a.m.
and p.m.
Wake up Timer Lets you set the TV to turn itself on.
Notes: When the TV turns itself on by the Wake up Timer
and no remote or front panel buttons are pressed for 2
hours, the TV will turn itself off.
If the Wake up Timer is turned off (box unchecked), Wake
up Time and Daily aren’t available.
Wake up Time Lets you set the time you want the TV to turn
itself on. Follow the same instructions as setting Current Time.
Daily Turn on (box checked) to have the Wake up Timer occur
daily. If the box is unchecked, the Wake up Timer occurs only
once.
Setup Menu
Signal Type Press the left or right arrow button to select the signal
your TV is receiving. Choose Cable if you are currently using cable or
a cable box for TV signals. Choose Antenna if you are currently using
an off-air antenna for TV signals.
Auto Channel Search Searches for channels the signal is receiving
and stores them in the TV’s channel list. Go to page 10 for more
information.
Autotuning Displays a choice list that lets you set up the TV to
automatically tune to the correct video input channel when you press a
component button (VCR, DVD, etc.) on the remote. Go to Chapter 3
for details about the autotuning feature.
Channel List Allows you to enter channels you want to delete or add
to your channel list.
Channel number Use the number buttons to enter the channel
number. To enter a one-digit channel, enter two zeros first. To
enter a two-digit channel, enter one zero first. For example, if you
want to add channel 7 to your list, press the number 0, 0, then
press 7.
In List If you’ve entered a channel you want to add to the
channel list, highlight In List and press the right arrow button to
select Yes. If you’ve entered a channel you want to delete from the
channel list, press the right arrow button to select No.
Timers
Sleep Timer 30 minutes. . .
Current Time 00:00 a.m.
Wake up Timer
Wake up Time 00:00 a.m.
Daily
Press </> or OK to select.
Press MENU to go to Main Menu.
16394790.04 Menu 4/12/04, 6:34 PM28