Filter
Top Products
Chapter 2: Using the Remote Control
Chapter 2 11
Graphics contained within this publication are for representation only.
Tip
To turn off most RCA, GE, and Proscan
components that are connected to the TV, press
ON•OFF twice within two seconds.
This feature only works with most RCA, GE, and
Proscan products.
Button Descriptions for TV Mode
Arrows Used to highlight different items in the TV menu and to
adjust the menu controls. When viewing a channel, press the left or
right arrow to change the screen format: 4:3, Zoom 14:9, Zoom 16:9,
Cinerama, and 16:9 Widescreen.
Indicator Indicates the programming mode when programming the
remote to control components. Lights when you press a valid button
on the remote. Flickers when a button is pressed and the batteries are
low.
(0-9) Number Buttons Enter channel numbers and password
settings directly through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit
channel, press the two digits and expect a few seconds delay. This is if
you want to enter a third digit.
CC Brings up the Closed Caption menu.
CH + or CH - Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
CLEAR Removes any menu or display from the screen and returns
you to normal viewing.
GO BACK Returns you to the previous channel.
INFO Brings up the channel banner; press again to clear the screen.
INPUT Toggles through the available input sources (VID1, CMPT,
RGB, DVI and current channel).
MENU Brings up the Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on or off. If in another
mode (VCR or DVD) and programmed, will turn the component on or
off.
PRESETS Resets the picture settings to factory default for the video
input channel you’re currently tuned to.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning to the original channel. Press repeatedly to
add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays
current status.
VOL – or VOL + Decreases or increases the TV’s volume.
Button Descriptions for DVD and
VCR Modes
AGAIN In DVD mode, replays the last several seconds of the title
you’re playing.
ANTENNA In VCR mode, functions as a TV/VCR button.
DVD
ON OFF
VCR TV
VOL
MUTE GO BACK
CH
CLEAR
MENU
PRESETS
CC
GUIDE
INFO
SKIP
123
4
56
7
89
0
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
AGAIN
ZOOM
OPEN CLOSE
SPEED
SEARCH
OKOK
Indicator
16394790.02 Remote 4/12/04, 6:33 PM11