Filter
Top Products
Connections & Setup
10 Chapter 1
Connecting the Device
This connection allows you to connect a device such as a VCR that has audio/video
outputs.
Using the example of a VCR:
1. Connect your cable and/or off-air antenna as described on page 6.
2. Connect your composite audio/video cables to the TV’s input.
Connect composite audio/video cables to the TV’s INPUT 2 jacks (R and L-
Audio, and Video) and to the VCR’s audio/video outputs..
Notes: To view the picture from the connected device, refer to Chapter 2,
Using the Remote Control. The section is called, Using the INPUT Button.
You can set up the TV to automatically tune to the correct device you want
to view. This is called Auto Tuning. See Chapter 3 for more information on
Auto Tuning.
Audio/Video Connection
COMPONENT VIDEO
Y
Pb
Pr
VIDEO
INPUT
L
R
AUDIO
VIDEO
OUTPUT
S-VIDEO
OUT
S-VIDEO
IN
L
R
AUDIO
L
R
AUDIO
SVGA INPUT
AUDIO VGA/SVGA/XGA
WIRED
REMOTE
CONTROL
(IR)
INPUT 1
COMPONENT/COMPOSITE
Y/VIDEO
PB
PR
L
R
L
R
DIGITAL
AUDIO
OUTPUT
FIXED/VARIABLE
AUDIO OUTPUT
HDMI 1 INPUT HDMI 2 INPUT
For Factory
use only
CABLE
INPUT
ANTENNA
INPUT
COMPOSITE
VIDEO
L
R
L
R
S-VIDEO
INPUT 3
COMPONENT/COMPOSITE
INPUT 4
COMPOSITE
CO
MP
O
SIT
E
INPUT 2
COMPOSITE
VIDEO
L
R
S-VIDEO
Note: This back panel
graphic is for representation
only. Your back panel might
be different.
White
Red
Yellow
Composite cables are color coded-
Yellow= video; Red= right audio; white=
left audio
• If you are done
connecting devices to
your TV, go to page 13
to complete the Assisted
Setup.
• To continue connecting
devices, go to the next
page.