Filter
Top Products
Connections & Setup
Chapter 1 13
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Digital Optical
cable
Connecting Your TV to a Receiver with Dolby
®
Digital
If you own a receiver with Dolby
®
digital decoding or PCM (Pulse-Code Modulation) that uses an
optical cable-type input, connect an optical cable for excellent audio quality.
• Connect one end of the optical cable to the DIGITAL AUDIO OUTPUT (OPTICAL) jack on your
TV and to the Digital Optical Input jack on your receiver/amplier receiver.
• If your receiver can decode Dolby digital and PCM, go to the Audio menu, select Advanced
Audio menu, then Digital Audio Output. Select AutoSelect (recommended) or PCM.
• If your receiver can decode only PCM, select PCM.
Setting Up Your TV
• Plug in the TV.
Note: When you first plug your TV into an outlet, the Power indicator on the front panel will
light and blink for approximately 30 seconds and then go off during the initialization of the TV.
This happens only when the TV is unplugged and plugged back in. The TV can only be turned
on after the Power indicator goes off.
• Put batteries in the remote.
• Turn on the TV.
Remote Control Buttons Used for the
Assisted Setup
To use the TV’s menus, rst press the TV button on the remote control to put
the remote in TV mode. When the Assisted Setup screen appears, use the arrow
buttons to highlight one of the items listed in the menu. Use the up or down
arrow button to move up or down. Use the right or left arrow button to move
right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter, or a different color).
Complete the Assisted Setup
Your TV’s menu system allows you to customize your TV’s features. On-screen
information helps you choose settings to match your setup. The rst time you
turn on your TV, the Assisted Setup screen appears automatically. Press OK to
begin the setup.
Tip
To access the initial setup menus at a later time, press
MENU, choose Setup Options, then Assisted Setup.
MENU
CLEAR
TV
CC
SUBTITLE
PRESETS
ANGLE
SOUND
AUDIO
SUBCHANNEL
SKIP
REVERSE
PLAY
FORWARD
STOP
PAUSE
RECORD
Use these buttons during the Assisted Setup