RCA M50WH186 Flat Panel Television User Manual


 
Connections & Setup
6 Chapter 1
SVGA INPUT
AUDIO VGA/SVGA/XGA
WIRED
REMOTE
CONTROL
(IR)
INPUT 2
COMPOSITE
VIDEO
L
R
INPUT 1
COMPONENT/COMPOSITE
Y/VIDEO
PB
PR
L
R
S-VIDEO
L
R
DIGITAL
AUDIO
OUTPUT
VIDEO
L
R
Y/VIDEO
PB
PR
L
R
S-VIDEO
INPUT 3
COMPONENT/COMPOSITE
INPUT 4
COMPOSITE
FIXED/VARIABLE
AUDIO OUTPUT
HDMI 1 INPUT HDMI 2 INPUT
For Factory
use only
CABLE
INPUT
ANTENNA
INPUT
Get the Picture
The rst part of connecting your TV is to get the picture, also known as a signal. The back
panel of your TV allows you to receive cable channels by using the CABLE INPUT; receive local
off-air digital and analog channels by using the ANTENNA INPUT; and a digital cable by using
the CableCARD slot (with CABLE INPUT). See below for these locations.
Coaxial cable
CableCARD Slot CABLE INPUT ANTENNA INPUT
Getting Cable Channels
Connect a coaxial cable from the cable TV wall outlet to the CABLE INPUT on the back of the TV to
receive cable channels.
What You Need
Coaxial cable
What You Need To Know
When you get to the Channel Search screen in the Assisted Setup, place a check mark in the box
next to Cable Input. To complete a channel search now, go to page 14.
When you are ready to watch channels, make sure you are tuned to the Cable Input. Press the
ANT•CABLE button to tune to the Cable Input. Look for Cable Input to appear on the channel
banner. Go to page 15 for more information.
Getting Digital Channels
Connect a coaxial cable from an off-air antenna to the ANTENNA INPUT to receive free local off-air
digital and analog channels.
What You Need
Indoor or outdoor antenna
What you Need to Know
Visit www.antennaweb.org to get help deciding what type of antenna to use to receive the local
digital channels available to you. By entering where you live, this mapping program tells you what
local analog and digital stations are available using a certain antenna. Once you determine what
type of antenna you need, go to rca.com.
When you get to the Channel Search screen in the Assisted Setup, place a check mark in the box
next to Antenna Input. To complete a channel search now, go to page 14.
When you are ready to watch channels, make sure you are tuned to the Antenna Input. Press
the ANT•CABLE button to tune to the Antenna Input. Look for Antenna Input to appear on the
channel banner. Go to page 15 for more information.
Outdoor antenna
Indoor antenna
Note: This back panel graphic is for
representation only. Your back panel
might be different.