Filter
Top Products
Chapter 1 9
Connections & Setup
DVD Player + TV + VCR
1. Connect the audio cables to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jacks
on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn’t have S-Video, use the basic video connection listed above.
OR
• Component video (optional, not shown in illustration) – If your TV has component video (Y, P
B
, and
P
R)
jacks)
use video-grade cables for the Y, P
B
, and P
R
connections. Note that it is essential to match the
color coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic
video connection listed above.
NOTE: If you use this connection, you must change the Video Output in the Display
menu (see page 42). The default video output is S-video/Composite.
3. Connect the antenna or cable to the Antenna Input jack on the VCR.
4. Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack
on the television.
5. Insert the AC power cord into an AC outlet.
Go to page 18
CABLE
OR
OFF-AIR SIGNAL
L R
VIDEO
AUDIO
IN FROM ANT
IN
OUT
OUT TO TV
L R
VCR
VIDEO OUT
5.1 CHANNEL
AUDIO OUT
CENTER
OPTICAL COAX.
1
2
DIGITAL
AUDIO OUT
SURROUND
FRONT
MIXED
Y
Pb
Pr
Y
Pb
Pr
R L
SUBWOOFER
Pb
S-VIDEO
PROG. SCAN
COMPONENT
COMPOSITE
LR
VIDEO IN
AUDIO IN
ANT IN
S-VIDEO
TV
AUDIO OUT
L
R
DVD
PLAYER
TV
DVD
VCR
1
2
3
4