Filter
Top Products
Connections & Setup
12 Chapter 1
LR
VIDEO IN
AUDIO IN
ANT IN
S-VIDEO
TV
AUDIO OUT
L
R
CABLE
OR
OFF-AIR SIGNAL
DVD
PLAYER
VIDEO OUT
5.1 CHANNEL
AUDIO OUT
CENTER
OPTICAL COAX.
1
2
DIGITAL
AUDIO OUT
SURROUND
FRONT
MIXED
Y
Pb
Pr
Y
Pb
Pr
R L
SUBWOOFER
Pb
S-VIDEO
PROG. SCAN
COMPONENT
COMPOSITE
TV
DVD
1
2
DVD Player + TV with Audio/Video Input Jacks
1. Connect the audio cables to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jacks
on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-
VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn’t have S-Video, use the basic video connection listed above.
OR
• Component video (optional, not shown in illustration) – If your TV has component video (Y, P
B
, and
P
R
jacks)
use video-grade cables for the Y, P
B
, and P
R
connections. Note that it is essential to match the
color coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic
video connection listed above.
Note: If you use this connection, you must change the Video Output in the Display
menu (see page 42). The default video output is S-video/Composite.
3. Connect the AC power cord into an AC outlet.
Note: Your cable or off-air connection to the television should not be affected by this connection.
Connect your cable or off-air antenna to your television as you normally would. You may need to
consult your television manual for details.
Go to page 18