Filter
Top Products
13
!
On-screen Menus
Sleep Timer (Select Models Only)
This feature automatically turns off your TV at a duration you
choose from 1 to 99 minutes. The Sleep Timer only works if
you have found a code that controls your TV. The timing
mechanism for the Sleep Timer is built into your universal
remote control. To program the Sleep Timer, follow these steps.
PROGRAMMING THE SLEEP TIMER
1. Press and release the TV key.
2. Press and hold the SLEEP key for
three seconds. The illuminated
ON•OFF key turns on.
3. Release the SLEEP key.
4. Using the number keys, enter the
desired time in minutes (from 1-99
minutes). To set the timer to a
number under 10 minutes, first
press 0 and then the desired
number (e.g., 05 for five minutes).
The illuminated ON•OFF key
blinks with each keypress.
SLEEP
TV
ON•OFF
Accessing and Selecting Menu Items
Today’s advanced components use on-screen menus to help
you navigate through all their features and functions. While
this remote cannot access every menu system of every
component model, it does offer some menu functionality.
To use a component’s on-screen menu system, you first have
to put the remote in Menu Mode.
1. Make sure your components are
turned on and your TV is set to
the component’s input. (Use the
INPUT key to toggle through
video sources when in TV mode.)
2. Press the component key whose
menu you want to access.
3. Press the MENU key. The
illuminated ON•OFF key blinks,
indicating you are in the Menu
Mode.
4. Use the VOL+/- and/or CH+/-
keys to navigate through the
on-screen menu system.
5. To make a selection from
the on-screen menu, press
the MENU or OK key to
select the highlighted item.
TIP: If the remote doesn’t respond,
check to see that the illuminated
ON•OFF key is still blinking. Note: it
times out after 20 seconds. If this
happens, just press the MENU key
again, and then retry your selection.
Exiting a Menu Mode
The remote automatically times out of Menu Mode after
20 seconds of inactivity (no keys being pressed). At that
time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
corresponding component key on the remote (TV, VCR•DVD,
SAT•CBL). The illuminated ON•OFF key turns off.
MENU
VOL & CH
MENU
OK
ON•OFF
(BLINK)
SAT•
CBL
VCR•DVD
TV
ON•OFF
(BLINK)
RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 13