Filter
Top Products
the REVERSE key is pressed, the
illuminated ON•OFF key blinks.
Note: If you accidentally press
the REVERSE key after your
component responds, press and
release the FORWARD key. Then,
wait two seconds to see if your
component turns off again.
10. Once your component turns off,
you have found the correct code.
You must save the new code by
pressing and releasing the STOP
key. The illuminated ON•OFF key
turns off. You must press the
STOP key to save the code or the
correct code will not be stored!
11. To confirm that the component
key is programmed with the
correct code for maximum
functionality, test the component.
Attempt to control a variety of the
component’s functions with the
remote. If some of the features of
your components do not work,
different codes in the list can be
tried until you find the code that
allows the remote to control the
majority of your component’s
functions. See the section entitled
“Testing the Code for Maximum
Functionality” on page 8 for
more information.
11
FORWARD
ON•OFF
STOP
Once you’ve programmed the remote to control your
components, you may want to record the codes for future
reference. If you used the Direct Code Entry method, this is
easy. Just find the codes you programmed in and make a note
of them in the boxes on the next page. If you used one of the
Code Search methods to program your remote, you will need
to retrieve each component’s four-digit code. Retrieving the
actual code and writing it down will save you time if you
ever need to program the remote again (e.g., if programming is
lost when you change the batteries). If the codes are recorded,
you can use the Direct Entry method to reprogram your
remote to control your components, which is quick and easy.
1. Press and hold the component key
(TV, VCR•DVD, SAT•CBL) whose
code you wish to retrieve. The
illuminated ON•OFF key turns on.
2. While holding the component key
down, press and hold the INFO
key. The illuminated ON•OFF key
turns off.
3. After holding down both keys for
three seconds, the illuminated
ON•OFF key turns back on.
4. Release both keys. The illuminated
ON•OFF key remains on.
Code Retrieval
INFO
ON•OFF
ON•OFF
SAT
•CBL
VCR•DVD
TV
RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 11