Filter
Top Products
10
Setting Up the VCR
Startup
11. Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button
lets you switch between the picture coming from the VCR or
the picture from the TV channel. This button lets you record
a program on the VCR while watching another channel on
the TV. Details are on page 21.
The VCR will automatically switch the TV¥VCR setting to
VCR every time the VCR is turned on, a tape with the safety
tab removed is inserted, or you press PLAY.
A. Press VCR1 to set the remote to control the VCR.
B. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
C. Press CHAN up or down on the remote or CHANNEL up
or down on the VCR to change channels on the VCR.
The channel number changes in the display panel.
D. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TVÕs remote.
E. Return the TV to the VCR viewing channel (3 or 4) Ñ the
same Output Channel you selected in step 6.
F. Press VCR1, then TV•VCR to switch back to the picture
from the VCR.
12. Set the time and date.
When you first turn on the VCR, Ð Ð : Ð Ð appears in the clock
area of the VCRÕs display panel.
A. Press MENU•PROG on remote to see VCR MAIN MENU
on the TV screen.
B. Press 2 to display SET CLOCK.
C. Enter the time and date with the number buttons on the
remote.
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
¥ Press CLEAR on the remote to change incorrect entries.
D. Press MENU•PROG to remove the SET CLOCK menu
from the TV screen and start the clock.
E. Press 0 to exit the menu system.
The time and date appear on the TV screen
whenever you press DISPLAY, and the time
appears in the display panel.
SLP
VCR
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
SET CLOCK
Time --:--
(hh:mm)
Date --/--/--
Press MENU to exit