Filter
Top Products
First Things First
5
STEP 4: PLUG IN THE VCR
Insert the small end of the power cord into the back of the VCR.
Match the wide blade of the plug on the other end of the cord
with the wide slot in the AC outlet. Be sure to insert the plugs
completely.
STEP 5: TUNe THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV’s video input.
• If you connect your VCR using the IN FROM ANTENNA and
OUT TO TELEVISION jacks with RF coaxial cable, set the 3CH4
switch to channel 3 or channel 4--the channel you want to
use on your TV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select the TV’s video input to see the
signal. See the TV Owner’s Manual.
STEP 6: turn on the vcr
The first time you connect your VCR and turn it on, a menu
screen appears. This is the beginning of the On-Screen Guide
which helps you to set up specific features of the VCR. If you
choose not to use this Guide, you can set up each feature
individually.
Go to the next step to understand how to move through and
change items in the menu system.
STEP 7: Access the menus
The MENU and number buttons let you access, select, and change
menu items. For example, to change the Auto Play setting, you
would do the following:
VCR Viewing Channel
When using the ANTENNA jacks to
connect your VCR, tune your TV to
channel 3 or 4.
When using the audio/video jacks to
connect your VCR, tune your TV to the
TV’s video input.
2nd
1st