Filter
Top Products
Quick Reference Guides
Normal TV Viewing
Follow the two steps in the drawing for normal TV
viewing. To view UHF stations, just tune your TV to
the channel, regardless of what the VCR is doing. If
you have a TV Monitor/Receiver and the VCR's
audio and video outputs are connected to it, switch
the TV to "Tuner Input" and select the channel you
want, regardless of what the VCR is doing.
Q TURN POWER OFF OR TURN VCR LIGHT OFF
OPERATE
TV
AS USUAL.
\ /
/
// I -
t
Recording With TV Off
It is not necessary to have your TV on when you record.
IINSERT CASSETTE.
SELECT SPEED. ) SET TO TUNER
/ •
FINISHED. I PRESS RECORD. ISELECT CHANNEL
Recording and Viewing the Same Program
(_ TURN ON TV. I INSERT CASSETTE
(_ TUNE TV TO VCR CHANNEL (3 OR 4). _VCR LIGHT ON.
SET SPEED. SET TO TUNER.
PRESS PAUSE TO INTERRUPT RECORDING
PRESS IT AGAIN TO RESUME. (9) STOP WHEN FINISHED PRESS RECORD SELECT CHANNEL
Note: If you want to view another VHF or Cable-TV
channel after you start recording, press the VCR/TV
switch so the light above it goes off. Then select the
channel on the TV. If you want to view a UHF
channel after you start recording, simply tune the TV
to the channel. The recording will not be affected.
(Continued on next page)
19