Filter
Top Products
Here are some things 3ou should know before you set the clock:
• When you firs,, plug in your VCR, the clock will
read "
• The buttons for setting the clock are on the remote
hand unit.
• While you are setting the clock, the display on the
TV screen will prompt you through the procedure.
• If you press a wrong digit, press PROGRAM and
then start at beginning.
• The clock must be set to the correct time before
you can program the timer for unattended
recordings or use Express Recording (XPRL
• If power is interrupted, you may have to reset the
clock and re-enter your programs in the timer.
] Turn on 5'our VCR and T\'. Tune ','our TV to
[1] the VCR Channel (channel 3 or 4)-.The VCR
Channel is explained on page 13.
Press PROGRAM on the remote control.
This "menu" will appear on the TV.
TO SELECT MODE
PUSH HU_BCR 5HO_N
1 CLOCK SIT
2 NORMAL PROG_A_
] _AILY (M-F) PROGRAM
4 WEEkLy PRDGRAM
5 pRDGRRN R[VIEW
TO END PUSH PROGRAM
Press "1" to set the clock
I
121
F
131
The display prompts you to set the time.
CLOCK SIT
MONTHIDAV/YEAR
DhTE --/--1..
TO EH_ PUSH PROGRAM
Set the time by pressing two digit buttons on
the remote for the current hour and two
more for the minute.
(For example, press 0 2 I 5 for 2:15.)
Note: The CLEAR button does not operate in
clock set. If you make a mistake, press
PROGRAM and start again.
The display' prompts you to select AM or
PM.
_LO_ 5IT
TIME 02:1S /
-,_AM*I pM,_--
MDNTH/D_y/y_"
DATE HI--I°*
TO END PUSH PRDGRRM
Press "1" for AM or press "2" for PM.
Remember: Noon is 12:00 PM
Midnight is 12:00 AM
I
141
The display prompts you to set the date.
CLOCK SET
TIME 02:1_ pM
MO_TH,*DAy/y{_
TO _HD PUSH aROGRAM
Set the date by pressing six digits in order for
the month, day, and s'ear. (For example,
press 0 7 0 2 8 9 for July 2. 1989.)
Always press "0" before single-digit months
and days.
I
ISl
The day of the week will appear when you
have entered all six digits for the date.
CLOCK %ET
TIME 02:15 PN
MONTMIDRYIYEAR
DATE 07102189
SU_
TO END PUSH PROGRAM
Press PROGRAM to start the clock. (Note
that the display' on the VCR will show the
correct time after you press PROGRAM.
Press PROGRAM again to return to the
program you were watching.
16