Filter
Top Products
Chapter 5 47
Other Information
Advanced Connection
TV + VCR + Satellite Receiver
• Cables: A/V and RF Coaxial
Note: Your satellite receiver and television back panels may not look exactly like the models
shown here. This connection can also be used for a cable box.
1. Connect the VCR to the TV
A. Connect one end of the supplied RF
coaxial cable to the RF OUT jack on
the back of the VCR and the other end
to the TV’s antenna input jack.
B. Connect the A/V cables. Connect an
audio cable to the VCR’s Audio OUT
jack and the other end to the TV’s
corresponding audio input jack (if your
TV has more than one audio input jack,
use the L channel jack to make the
connection). Connect one end of the
video cable to the VCR’s VIDEO OUT
jack, and the other end to the TV’s
video input jack.
2. Connect the satellite receiver to the
VCR
A. Connect one end of a second RF
coaxial cable (not included) to the
VCR’s ANT. IN jack. Connect the other
end to the satellite receiver’s antenna
output jack.
B. Connect the A/V cables. Connect an
audio cable to the VCR’s Audio IN jack
and the other end to the satellite
receiver’s audio output jack (if your
satellite receiver has more than one
audio out jack, use the L channel jack
to make the connection). Connect one
end of the video cable to the VCR’s
VIDEO IN jack, and the other end to
the receiver’s video output jack.
3. Connect a TV antenna or cable feed to the satellite receiver
If you have cable or a standard TV antenna, connect its RF coaxial cable (not included) to the antenna
input jack on the satellite receiver.
4. Connect the satellite antenna’s cable to the satellite receiver
Connect the satellite antenna’s RF coaxial cable feed (not included) to the receiver’s satellite input jack.
CABLE/
ANTENNA
VCR
TV
VIDEO
R
L / MONO
S-VIDEO
AUDIO
L
IN
OUT
CH3
CH4
SATELLITE
RECEIVER
S-VIDEO
L
R
VIDEO
OUT
IN FROM ANT
OUT TO TV
SA TELLITE
IN
From
Satellite
From Cable
or TV Antenna
CH
ANT. IN
OUT
IN
AUDIO
VIDEO
3 4
RF OUT
V
C
R
TV
S
a
t
e
l
l
i
t
e
4
3
2A
2B
1A
1B