Filter
Top Products
12
Remote Control
POWER
REW
PLAY
FWD
RECORD
STOP
PAUSE
MENU
TRACKING
VOL
CHAN
TV•VCR
SPEED
SLOW
VCR
-
+
SEARCH
TV
F.ADV
CLEAR
PROG
DISPLAY MUTE
1
2
3
4
5
6
7
8
9
0
PREV CH
INPUT
CHAN Up or Down
Selects next higher or lower
channel in the VCRÕs channel
memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries
when setting the clock or VCR for
a timer recording.
DISPLAY
Shows VCR operating displays
on the TV screen.
Displays the time counter.
FWD (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Searches the picture in forward
motion during playback.
F.ADV (Frame Advance)
Lets you view one frame with
each press of the button while the
tape is paused.
INPUT
Turns the line input on or off.
VID1 appears in VCRÕs display
panel and VIDEO appears on TV
screen.
Line input refers to the signal
coming from the component
connected to the AUDIO/VIDEO
IN jacks on the back of the VCR.
MENU PROG
Displays the VCR MAIN MENU
on the TV screen.
Removes a menu from the
screen.
Used to program the VCR.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then
press the other two numbers.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns the VCR on and off.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two
channels.
VCR Function Buttons
Using the Remote Control
TV
Turns on a compatible RCA,
ProScan, or GE TV and sets the
remote to control the TV.
Used with POWER button to turn
on another brand of TV, other
than RCA, when the remote is
programmed to control that TV.
See page 11.
VCR
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control the VCR.
Component Buttons
Press one of the buttons to set the remote to operate that component.