Filter
Top Products
26
Recording a Program
Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature. The VCR will
turn off automatically at the end of the recording.
VCR
SLP REC
POWER
CHANNEL
STOP• EJECT
TRACKING
RECORD
REW
PLAY• PAUSE
FWD
RECORD
Display showing 30 minutes
remaining for recording.
REC Ch 11
Record Length 0:30
Press REC to set length
Express Display on
TV Screen
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on the remote.
5. Press RECORD twice to activate XPR recording.
6. Press RECORD repeatedly until the amount of recording time for the
program is displayed in the VCRÕs display panel or on the TV screen.
Each press increases the time Ñ 30 minutes up to two hours and then one
hour up to four hours.
The amount of time the VCR will record and REC will appear in the VCRÕs
display panel.
You can increase the amount of recording time by pressing REC
or RECORD.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT on the VCR for
approximately three seconds.
Press Recording
RECORD Time
0:30 (30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
(Normal Recording)
0:00 (Stops)