Filter
Top Products
13
Using the Remote Control
CHAN Up or Down
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
CLEAR
Removes menus or status displays
from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then press
the other two numbers.
POWER
Turns off a compatible TV when
remote is set to control TV.
Used with TV button to turn on a
compatible TV, other than RCA,
when the remote is programmed to
control that TV. See page 11.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use the
number buttons to select another.
Press PREV CH to switch between
the two channels.
Works as an ENTER key on some
TVs.
VOL (Volume) Up and Down
Raises and lowers sound.
RECORD
Starts VCR recording.
Used for express recording (XPR).
See page 26.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX and ZERO
SEARCH menus on TV.
Lets you advance tape 60 or 120
seconds during playback.
SLOW
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed
(SP or SLP).
STOP
Stops the normal functions such as
record, playback, rewind, fast
forward, and pause.
TRACKING Up and Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture ÒjitterÓ during
stop-action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
VCR Function Buttons
(continued)
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with every TV.
Remote Control