Filter
Top Products
16
Playing a Tape
Operating Instructions
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TV’s video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
The VCR turns on automatically. The VCR indicator lights if the AUTO TV/VCR
feature is turned ON. Tape begins playback automatically if the safety tab on
the cassette has been removed and the AUTO PLAY feature is turned on.
3. Press PLAY•PAUSE on the VCR or PLAY on the remote if necessary.
appears in the VCR’s display panel.
4. Press TRACKING up or down on the remote or VCR to remove any streaks from
the picture if necessary. Details are on page 20.
5. Press STOP•EJECT on the VCR or STOP on the remote.
6. Press REW.
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. Also, if you press POWER while a tape is rewinding, the VCR turns
off automatically when it is completely rewound.
7. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
CHANNEL
POWER
TV•VCR
TRACKING
RECORD
REW
FWD
STOP•EJECT
PLAY•PAUSE
VCR
TIMER
REC
PM
Safety Tab