Filter
Top Products
29
Recording a Program
Checking or Clearing Timer Recordings
1. Press MENU on the remote to display the VCR MAIN
MENU.
2. Press 1 to display the TIMER RECORDINGS menu.
3. Press 2 to display the REVIEW EXISTING PROGS
menu. Each entered program is displayed for a few
seconds in sequence.
4. Press MENU or 2 or DISPLAY to display information
faster.
5. Press CLEAR on the remote when the program you
want to erase appears on the screen.
Recording While You’re Away (Timer Recording)
VCR MAIN MENU
1 TIMER RECORDINGS
PROGRAM 1 (ONE TIME)
CHANNEL VIDEO IN
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the VCR’s
AUDIO and VIDEO IN jacks. Recording from the line
input is convenient if you have a satellite receiver or
similar component attached to these jacks.
To timer record from the component connected to the
VCR’s line input, press INPUT on the remote to enter
VIDEO IN instead of the channel number on the TV screen
during timer programming.
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 (ONE TIME)
CHANNEL 08
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 02/02/96 FRI
TAPE SPEED SLP
PRESS CLEAR TO DELETE
PRESS MENU FOR NEXT PROG