Filter
Top Products
Page 14 FPI FireWizard
TM
Remote Control Manual
2) Programming the Off-Time of Program 1
Press and release the PROG button again to program the Off-Time for Program 1.
Use the “+” and “-” buttons to adjust this time setting.
The LCD will show the following:
3) Programming the Set Temperature for the On-Time of Program 1
Press and release the PROG button again to program the Set Temperature. Use
the “+” and “-” buttons to adjust the temperature setting.
Program 1 Off-Time
Programming of Program 1
Program 1 Set Temperature
Programming of Program 1