Filter
Top Products
15
Turn off the power.
1
Cut off the piece of material from the roll.
2
9. Removing Material
Removal of taken-up roll material
from the TU is a task which must be
carried out by two or more persons.
Injury may result if
attempted by one
person without
assistance.
10.Maintenance
Cleaning the Mirror and Sensor
Wipe clean with a dry cloth.
Grime on the mirror or sensor may cause material in the sensor's detection area not to be sensed correctly.
Be sure to turn off the power to the TU before cleaning.
Never attempt to oil or lubricate the mechanism.
NOTICE
Detach the paper tube and material from the flanges.
5
Support the paper tube and material from
underneath to prevent from falling.
3
The second person loosens
the retaining screws and
moves the arm.
4