Filter
Top Products
410X 21
Changing the Aspect Ratio Mode
To change the aspect ratio mode, select GENERAL, and then
select TV DISPLAY. For widescreen (16:9) monitors, select
WIDE. For standard monitors and letterbox viewing (black
bars on the top and bottom of the screen, but the entire image
preserved), select NORMAL/LB. For standard 4:3 monitors
and a full-screen image, but with the edges variably cropped
to fit (“pan-and-scan” mode), select NORMAL/PS.
TV DISPLAY
TV TYPE
ANGLE MARK
OSD LANG
MAIN PAGE
NORMAL/LB
WIDE
- - GENERAL PAGE - -
NORMAL/PS
CAPTIONS
SCR SAVER
Changing the Video Output Mode
To change the video output mode, select GENERAL, and then
select TV TYPE. The default is MULTI. If you experience
problems playing a PAL disc on your NTSC monitors, select
NTSC. If you are using European-spec PAL monitors exclu-
sively, select PAL.
PIC MODE
TV DISPLAY
TV TYPE
ANGLE MARK
OSD LANG
MAIN PAGE
NTSC
PAL
- - GENERAL PAGE - -
MULTI
SCR SAVER
Note:
• The default “MULTI” will automatically output NTSC video from NTSC
discs, and PAL video from PAL discs. Many video monitors can
automatically handle either type of video signal. NTSC is the North
American standard, and the only type of disc many North American
users will encounter.