Filter
Top Products
8 410X
DVD/VCD/CD-AUDIO PLAYBACK
Inserting a DVD/VCD/CD
1 Turn the vehicle’s ignition key to the ACC or ON position.
ACC or engine
ON position
2 Press either the [ON] button on the front panel or the
[POWER] button on the remote control.
3 Holding the disc by its edges, gently insert the disc label-
side up into the loading slot until the power-loading
mechanism pulls the disc in.
Disc Playback
DVD playback will often begin automatically when the disc is
inserted. With some DVD discs, you will need to press
[ENTER] or [ ] to begin playback.
CD-Audio discs will begin playback automatically.
CDs with MP3 files may require you to navigate the file
structure menu. For more information, see “MP3 Playback on
CD-R Discs.”
Stopping Playback
There are two ways to stop playback:
• Pressing [
] once will stop playback, and the 410X will
store the location last played on the disc. Playback can be
resumed at the same point on the disc by pressing [ ].
• Pressing [
] twice will stop playback and clear the 410X’s
memory of the last point played on the disc. Pressing [ ]
at this point will cause the 410X to begin playback from the
beginning of the disc.
Selecting a Track or Chapter
Moving to the Next Track or Chapter
Press the [NEXT] button during playback. The next track or
chapter will be selected.