Filter
Top Products
Installation
Runco PL-43DHD and PL-50DHD Owner’s Operating Manual 17
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PlasmaWall installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the PlasmaWall on a wall or table stand 18
2 Connect the DHD Controller to the PlasmaWall 21
3 Connect signal sources to the DHD Controller 23
4 Connect external controller to DHD Controller RS-232 port
(optional)
27
5 Apply power to the PlasmaWall 29
6 If using the PlasmaWall with a PC, adjust PC display prop-
erties
30
7 Display calibration: adjust the following for each input,
starting with Comonent SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
34 through 42
Note