Filter
Top Products
Aspect Ratio provides selection of one of ve aspect ratios: Anamorphic, Standard 4:3, Letterbox, VirtualWide
and Cinema. To select an aspect ratio via the main menu, press either the up and down buttons on the remote or
front panel, highlight ASPECT RATIO and press ENTER. The aspect ratio menu will then appear with the four
choices; highlight the desired aspect ratio with the up or down buttons and press ENTER. Otherwise, you may
select an aspect ratio by pressing either the up or down arrow buttons (on the remote or front panel) when no
menus are on-screen, or by pressing one of the direct access buttons on the remote control. The aspect ratio setting
is saved for each input and resolution separately.
Aspect Ratio
Indicates selection has been made for the Aspect Ratio selection menu
• Press ENTER to select the Anamorphic Aspect Ratio, 16:9
• Press ENTER to select the Standard 4:3 Aspect Ratio
• Press ENTER to select the Letterbox Aspect Ratio, 16:9 in 4:3
• Press ENTER to select the VirtualWide Aspect Ratio
• Press ENTER to select the Cinema Aspect Ratio for 2.35
Picture quality adjustments are the controls that change different parameters of the image such as the amount of
color, black level, etc. This section will describe what each function does and how to adjust them properly. The
picture settings are stored separately for each input. To access the picture quality adjustments, press MENU and
over the cursor down to Picture (indicated by the green highlight) and press ENTER. The picture quality sub-
menu will then appear.
To make an adjustment to a particular function, highlight the function with the up or down arrow buttons and
press ENTER. Once the function is on-screen (i.e. brightness), pressing the UP arrow button on the remote or
front panel will increase the value of that function; pressing the DOWN arrow on the remote or front panel will
decrease the value of that function.
Picture (These settings are stored separately for each input).
Indicates selection has been made for the Picture selection menu
• Press ENTER to allow the increase and decrease of image Brightness with the LEFT and RIGHT arrows.
• Press ENTER to allow the increase and decrease of image Contrast with the LEFT and RIGHT arrows.
• Press ENTER to allow the increase and decrease of image Color with the LEFT and RIGHT arrows.
• Press ENTER to allow the increase and decrease of image Tint with the LEFT and RIGHT arrows.
• Press ENTER to allow the increase and decrease of image Sharpness with the LEFT and RIGHT arrows.
NOTE: A BLUE FILTER must be used so only the blue color bars can be seen on a standard color bar test
pattern. Blue lters are provided with Video Essentials or AVIA test DVDs.
Aspect Ratio
Anamorphic
Standard 4:3
Letterbox
VirtualWide
Cinema
X
Brightness
Contrast
Color
Ti
nt
Sharpness
Picture
18