Filter
Top Products
Introduction
Q-1500d Series Installation/Operation Manual 5
PRE
L
IMINAR
Y
Parts ListYour Q-1500d is shipped with the following items. If any items are missing or damaged,
please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO.
• Q-1500d Series LED Home Theater Projection System:
•Projector
• Two (2), DHD Controller units (Primary and Secondary)
• Brightness Acceleration Engine
• Remote Control Unit and two (2), AAA-size batteries
• AC Power Cords (5)
• 5.0-mm Hex wrench (for lens shift adjustment and locking the lens position)
•Cables and Adapters for Connecting the DHD Controllers to Each Other and to the
Brightness Acceleration Engine:
• HDMI-to-HDMI Cable, 1.6 feet (0.5 meters) (2)
• BNC-to-BNC Cable, 11.8 inches (0.3 meters) (10)
• RCA-to-RCA Cable, 11.8 inches (0.3 meters) (2)
• RS-232 Cable (Null-modem), DB-9 female to DB-9 female, 11.8 inches (0.3 meters)
• RJ-11 Telephone Cable, 50 feet (15.24 meters) (2)
• Serial Port Adapter, RJ-11 Female to DB-9 Male (2)
• HDMI-to-HDMI Cables (2), sold separately (refer to Optional Accessories, below)
• Rack-mount hardware for the DHD Controllers and Brightness Acceleration Engine
• Runco Q-1500d Quick Setup Guide
Optional Accessories:
• Ceiling mount kit (part number 956-0301-00)
• CineWide™ technology (fixed, secondary anamorphic lens)
• CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized
mount)
• Short-throw primary lens, 1.64:1-1.86:1 (must be factory-installed)
• Long-throw primary lens, 2.52:1-4.00:1 (Q-1500d Ultra only; must be factory-installed)
• HDMI-to-HDMI Cable, length specified at time of order:
• 16.4 feet (5.0 meters) (part number 903-1010-00)
• 24.6 feet (7.5 meters) (part number 903-1011-00)
• 32.8 feet (10.0 meters) (part number 903-1012-00)
• 49.2 feet (15.0 meters) (part number 903-1013-00)
• 65.6 feet (20.0 meters) (part number 903-1014-00)