Runco VX-2c Projection Television User Manual


 
This is the first menu that will appear when “MENU” is selected. The above diagram depicts the main menu.
There are five option items in the Main menu:
Wt. Balance: Adjusting Contrast, Brightness, and Gamma
Orient: Adjusting Picture Orientation (FF, CF, RF, and CR)
Lens Adj. : Adjusting Lens shift, Lens Zoom, and Lens Focus.
Proj. Info: Checking the projector status
Advanced: This window is used for optimization and service info.
When the MENU button is pressed the following will be displayed on the Vacuum Florescent Display.
Arrows indicates highlighted option to be selected:
18
MAIN MENU
MENU DESCRIPTION AND NAVIGATION
Main Menu
Wt. Balance
Orient
Lens Adj.
Proj. Info
Advanced
MAIN: Wt. Balance►
Orient ►
Selectable options in main menu.
Note: Due to limitation of the display, only two options can be displayed at a time
Main menu is
currently selected.
Wt. Balance
Gain
Offset
Gamma
Wt. Balance
Indicates you are on the Image Settings menu
Gain Press ENTER to access the Contrast Setting menu
Offset Press ENTER to access the Brightness Setting menu
Gamma Press ENTER to access the Gamma Setting menu
From the Main menu use the Up or Down arrow to select “Wt. Balance” and press the Enter button to call up the
Wt. Balance options.
There are three options Gain, Offset, Brightness, and Gamma.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Each selection has separate adjustment for Red, Green , and Blue.
Press the Enter button on selected item. A cursor will blink, use the up or down arrow keys to make your adjustment.
Press Enter to store the change.
Press the Menu button to exit.
MAIN MENU
Opening screen
Wt. Balance Press ENTER to access the White Balance Settings menu
Orient Press ENTER to access the Orientation Setting menu
Lens Adj. Press ENTER to access the Lens Adjustment setting menu
Proj. Info Press ENTER to access the Projector Status menu
Advanced Press ENTER to access the Advanced Settings menu
* Press the MENU key to call up the MAIN window.
* Use the UP or DOWN button to move to your selection.
* Press the ENTER button to activate your selection.
* Press MENU to exit.
Note: Due to limitation of the display, only two options can be displayed at a time.