Filter
Top Products
Installation
22 PlasmaWall XP Series Installation/Operation Manual
PRE
L
IMINAR
Y
3.4
Connections to the
PlasmaWall and DHD
Controller
Proceed as follows to connect the PlasmaWall to the DHD Controller, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connecting the
PlasmaWall to the DHD
Controller
Connect the DHD Controller to the PlasmaWall as shown in Figure 3-4 and described in
the sections that follow.
Figure 3-4. Connecting the PlasmaWall to the DHD Controller
➤
SERIALPC IN
AUDIO
SLOT1
P
R
/C
R
/R P
B
/C
B
/B
Y/G
AUDIO
RL
COMPONENT/RGB IN
SLOT2 SLOT3
AV IN
AB
HDMI OUT
Display Control
(RS-232 OUT)
RS-232
Communication
Cable and
Adapter (provided)
PlasmaWall
Rear Panel
(XP-65DHD shown here)