Samsung 20070320082319250 Blu-ray Player User Manual


 
40 - English
System Setup
5
Press the œ√buttons to select the desired
Speaker, then press the ENTER button.
Speaker Setup
Speaker
Large : Delivers full bandwidth sound with bass below 100 Hz.
Small : If LFE is on, bass below 100 Hz will outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.
None
: Select to disable the speakers.
Subwoofer Speaker
LFE : Select to use the subwoofer speaker.
None
: Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R)
speakers are set to Large.)
Press the RED(A) button
A test tone will be sent to L C R RS LS
LFE in order so you can make sure the speakers are set
up correctly.
To end the test tone, press the RED (A) button again.
Press the RETURN or œ button to return to
the previous menu.
Press the MENU button to exit the menu.
NOTE
Front (L,R) Large, Small
Center (C) Large, Small, None
Surround (LS,RS) Large, Small, None
Subwoofer (SW) LFE, None
Setting up the Speaker
Options
If you have connected this player to an Amp/Receiver or
Home theater via the 5.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
1
With the unit in Stop mode, press the MENU
button.
2
Press the buttons to select Setup, then press
the ENTER or button.
3
Press the
buttons to select Audio Setup, then
press the ENTER or button.
4
Press the
buttons to select Speaker Setup,
then press the ENTER or button.
BD
BD Player Setup
Title
Music
Photo
Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
System Upgrade
Parental Setup
BD
BD Player Audio Setup
Title
Music
Photo
Setup
Digital Output : PCM
PCM Down Sampling : On
Dynamic Compression
: On
Speaker Setup
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
BD
BD Player Speaker Setup
Test Tone
L
Large
LS
Large
R
Large
Large
C
LFE
RS
Large
MOVE SELECT RETURN EXIT
A
P1200_XAC_ENG_37~53 3/7/70 11:17 AM Page 40