Filter
Top Products
English - 56
Automatic Degaussing to Remove Color Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, then press the “
POWER( )” button on the remote control.
☛ If your television will be left unattended, press the “ ” (On/Off) button to turn your
television off.
Viewing Pictures From External Sources (depending on the model)
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1 Check that all the necessary connections have been made.
2 Switch your television on, then press the SOURCE
()
button
repeatedly.
Result
: The input sources are displayed in the following
order:
TV AV1 AV2 AV3 S-Video
(PC) Component2 Component1
◆
PC : When the PC is connected, it is selected.
(depending on the model)
➢
◆
Depending on the source selected, the pictures may
appear automatically.
➢
To watch television programmes again, press the TV ()
button and select the number of the channel required.
AA68-03330A-01EngAsia 10/13/04 5:59 PM Page 56