Samsung 350 Flat Panel Television User Manual


 
24
English
Basic Features
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTER
E
button.
3. Press the or button to move the picture up
or down.
4. Press the ENTER
E
button.
If you want to reset the pictures to its original
position, select Reset, and then press
ENTER
E
. The picture will be reset to its
default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the or button to select Position.
2. Press the ENTER
E
button.
3. Press the , , or button to move the
picture.
4. Press the ENTER
E
button.
If you want to reset the pictures to its original
position, select Reset, and then press
ENTER
E
. The picture will be reset to its
default position.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
y Straighten your back.
y Keep a distance of 45~50 cm (15~19 inches) from your
eyes to the screen. Look down at the screen and face
the screen forwards.
y Adjust the angle of the product so that light is not
reflected onto the screen.
y Keep your elbow at a right angle and keep your arm
level with the back of your hand.
y Keep your elbow at a right angle.
y Place your heels flat on the ground while keeping your
knees at an angle of 90 degrees or higher and maintain
the position of your arm so that your arm is below your
heart.
Digital Noise Filter (Off / Low / Medium / High /
Auto): If the broadcast signal received by your set is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
When the signal is weak, try other options until the
best picture is displayed.
HDMI Black Level (Low / Normal): Lets you select the
black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signal).
Film Mode (Off / Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (1080i).
Picture Reset (Reset Picture Mode /
Cancel)
Resets your current picture mode to its default settings.