Filter
Top Products
26
English
Basic Features
Setup Menu
¦ Setting the Time
MENU
m
→ Setup → Time → ENTER
E
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
✎
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Time Zone: Select your time zone.
✎
This function is only available when the
Clock Mode is set to Auto.
DST (Off / On / Auto): Switches the Daylight Saving
Time function on or off.
✎
This function is only available when the
Clock Mode is set to Auto.
¦ Using the Sleep Timer
MENU
m
→ Setup → Time → Sleep Timer → ENTER
E
■ Sleep Timer
t
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the Sleep Timer, select Off.
¦ Setting the On/Off Timer
MENU
m
→ Setup → Time → Timer 1 → ENTER
E
You can set the TV to turn on automatically at a preset time.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
L Move
U
Adjust
E
Enter
R
Return
On Time
Off Time
Volume Contents
Repeat
▲
▼
Sun Mon Tue Wed Thu Fri Sat
12 00 am Inactivate
12 00 am Inactivate
10 TV Air 3
Once
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Contents: Select a content to be played when the TV
is turned on automatically. (USB can be selected only
when a USB device is connected to the TV.)
– TV/USB: Select TV or USB. (Make sure that an USB
device is connected to your TV.)
– Antenna: You can view an antenna source.
– Channel: Select the desired channel.
– Music: Select the folder containing MP3 files on the
USB device.
– Photo: Select the folder containing JPEG files on the
USB device.