Filter
Top Products
English - 11
OPERATION
Turning the TV On and Off ¦
Press the POWER
P
button on the remote control. You can also
use the
P
button on the TV.
Plug & Play Feature ¦
When the TV is initially powered on, basic settings proceed automatically
and subsequently.
1. Press the POWER
P
button on the remote control.
You can also use the N
P
button on the TV.
2. Press the E button, then “Select Language of the OSD.” menu is
automatically displayed.
3. Press the ▲ or ▼ button to select language, then press the E button. The message “Select
‘Home Use’ when installing this TV in your home.” is displayed.
4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the E button. The
message “Select the Antenna source to memorize.” is displayed.
We recommend setting the TV to “ N Home Use” mode for the best picture in your home
environment.
“ N Store Demo” mode is only intended for use in retail environments. If the unit is accidentally set
to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the
TV for 5 seconds.
5. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the E button
to select “Start”.
Air N : “Air” antenna signal. / Cable: “Cable” antenna signal. / Auto: “Air” and “Cable” antenna
signals.
In Cable mode, you can select the correct signal source among N STD, HRC, and IRC by pressing
the ▲, ▼, ◄ or ► button, then press the E button. If you have Digital cable, select the cable
system signal source for both Analog and Digital. Contact your local cable company to identify
the type of cable system that exists in your particular area.
6. Press the E button to select “Start”. The TV will begin memorizing all of the available channels.
To stop the search before it has nished, press the N E button with “Stop” selected.
After all the available channels are stored, it starts to remove scrambled channels. The N
Auto program menu then reappears. Press the E button when channel memorization is
complete. The message “Set the Clock Mode.” is displayed.
7. Press the E button.
Press the ▲ or ▼ button to select “Auto”, then Press the E button. The message “Set to daylight
saving time.” is displayed. If you select “Manual”, “Set current date and time” is displayed.
8. Press the ▲ or ▼ button to select “Off”, “On” or “Auto”, then press the button.
9. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the E button. If you
have received a digital signal, the time will be set automatically.
10. The connection method to provide the best quality HD is offered. After conrming the method, press
the E button.
11. The message “Enjoy your TV.” is displayed. When you have nished, press the E button.
Plug & Play
Select Language of the OSD.
Language : English r
E
Enter
CHVOL