Filter
Top Products
English - 22
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock rst.
On Time ● : Set the Hour, Minute, am/pm, and Activate/Inactivate. (To activate timer with the
setting you’ve chosen, set to “Activate”.)
Off Time ● : Set the Hour, Minute, am/pm, and Activate/Inactivate. (To activate timer with the
setting you’ve chosen, set to “Activate”.)
Volume ● : Set the required volume level.
Antenna ● : View antenna type. (Air or Cable)
You can set the Antenna by selecting Channel → Antenna. N
Channel ● : Select the desired channel.
Repeat ● : Select “Once”, “Everyday”, “Mon~Fri”, “Mon~Sat”, “Sat~Sun” or “Manual”.
When “ N Manual” is selected, press the ►button to select the desired day of the week. Press the
E
button over the desired day and the
c
mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control. N
Auto Power Off N
When you set the timer On, the television will eventually turn off, if no controls are operated for
3 hours after the TV was turned on by the timer. This function is only available in timer On mode
and prevents overheating, which may occur if a TV is on for too long time.
GameMode→Off/On ❑
When connecting to a game console such as PlayStation
TM
or Xbox
TM
, you can enjoy a more realistic
gaming experience by selecting the game menu.
Restrictions on game mode (Caution) N
To disconnect the game console and connect another external device, set – Game Mode
to Off in the setup menu. If you display the TV menu in Game mode, the screen shakes
slightly.
If N Game Mode is On :
Picture mode is automatically changed to – Standard and cannot be changed.
Sound mode is automatically changed to – Custom and cannot be changed. Adjust the
sound using the equalizer.
Game Mode N is not available in regular TV and PC mode.
If the picture is poor when external device is connected to TV, check if N Game Mode is On. Set
Game Mode to Off and connect external devices.
V-Chip ❑
U.S.A and Canada Only N
The V-Chip feature automatically locks out programs that are deemed inappropriate for children.
The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or
changed.
“ N V-Chip” function is not available in HDMI or PC mode.
The default PIN number of a new TV set is ‘0-0-0-0’ N
If you forget the PIN, press the remote-control buttons in the following sequence, which resets N
the pin to 0-0-0-0 : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
Allow all N : Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.