Filter
Top Products
CHAPTER FIVE: VCR OPERATION 5.13
VCR OPERATION
Using Program Review
Program Review allows you to review all of the programmed recordings currently stored
in the VCR’s memory and to remove a programmed recording quickly and easily.
2
Press the UP/DOWN▲▼
button to select “Program
Review”, then press the
LEFT/RIGHT
œœ√√
button.
The information for the
first program appears on
the screen.
1
Press the MENU button.
Press the UP/DOWN▲▼
button to select “VCR
Setup”, then press the
LEFT/RIGHT
œœ√√
button.
▼
Program Review is only available
if you have programmed your VCR
to record at a later time.
3
To see the information for
the program number,
press the RIGHT
√√
button.
▼
If you’re recording through a
cable box, the Program Review
screen displays the output channel of
the cable box as the channel number
to be recorded.
4
If you want to remove a
program from memory,
press the CLEAR button
when the program you
want to erase appears on
the screen. That program
is erased from memory.
Press the MENU button to
exit.
▼
The VCR is equipped with
a program memory backup that
saves all the timer program informa-
tion if the power to the VCR is
interrupted. If the unit has been
without power, all of the timer pro-
gram information will be disabled,
until you reset the clock. When the
clock is reset, the programs will be
restored.
03233A(E)-CHAPTER 5 12/9/03 10:09 AM Page 13