Filter
Top Products
● NAVIGATING THE SETUP MENU
English _49
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
The following describes each option found in the Audio Setup Menu.
❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via digital output.
Select Bitstream when connecting to a Dolby Digital Decoder.
Note
• There is analog audio output when you play a DTS sound disc
❷ MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH). Select Bitstream when
using the Digital Audio Output.
❸ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this
case, all signals will be output without any changes.
❺
Power On Music
This menu is used to activate or deactivate the opening sound when you turn on the DVD
player
- On : To turn On Start up music
- Off : To turn Off Start up music
Note
Even when PCM Down sampling is Off
• some discs will only output down-sampled audio through the digital outputs.
• To make the Setup menu disappear, press the MENU button.