Samsung AK68-01859B Blu-ray Player User Manual


 
English 23
04 Connections
Case 4 : Connecting to a TV (Video) - Good Quality
Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)
terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of
your TV.
Turn on the player and TV.
Press the input selector on your TV remote control until the “VIDEO” signal from the player appears
on the TV screen.
If you have set the remote control to operate your TV (See page 19), press the TV SOURCE
button on the remote control and select VIDEO as the external source of the TV.
NOTE
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~26)
The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.
If there is only one audio input terminal on the TV, connect it to the AUDIO OUT(right/white) terminal of the player.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection
systems and the picture will be distorted on the television.
1.
2.
3.
!
WhiteRed Yellow
Audio/Video cable
01859B-BD-C6500-XAC-ENG.indb 23 2010-01-19 오후 1:36:40