Filter
Top Products
37
English
Using the Menus
Setup
Option Description
Network Setup Cable Network Setup-Manual
To connect the TV to the LAN using a static IP address, you
must set up the Internet Protocol (IP).
1. Set Network Type to Cable.
2.
Select Cable Network Setup.
3. Set Internet Protocol Setup to Manual.
4. Set up IP Address, Subnet Mask, Gateway and DNS
Server.
Press the number buttons on the remote control
when you set the Network manually.
5. Select Network Test to check the network connectivity.
Wireless Network Setup
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network
connection status after setting up the network.
Select a network: Access Point: You can select
the IP sharer to use when using a wireless network.
If a wireless Access Point is not in the Access Point
list, press the Red button.
When the connection is made, you will be returned
to the screen automatically.
If you have selected an Access Point with a security
authentication: The Security Key input screen
appears. Enter the security key and press the Blue
button on the remote control.
If security encryption type is WEP, 0~9, A~F will be
available when you input security key.
Connecting WPS (Wi-Fi Protected Setup)
If Security Key is already set: In access point list, select
WPS.
You can select PBC, PIN, Security Key.
Connecting by using PBC: Select a PBC (Push
Button Configuration). Press the PBC
button on
the AP (access point) within 2minutes, and wait for
connection.
Connecting by using PIN: Select a PIN (Personal
Identification Number).
The message showing the PIN Code is displayed.
Input the PIN Code at AP device within 2minutes.
Select OK and wait for connection.
Try again if connecting operation doesn’t work.
When the connection is not established although
tried again, reset the access point. Please refer to a
manual of each access point.
Connecting by using Security Key: When selecting
Security Key, the input window is
displayed. Input
the security key and press ENTERE button.
Try again if connecting operation doesn’t work.
If Security Key is not set: When security setting
of AP that supports WPS is NONE, you
can select
PBC, PIN, None Security. None Security is capable
of connecting to AP directly without using WPC
function.
Process of PBC, PIN is same as above.
Refer to if Security Key is already set.
Try again if connecting operation doesn’t work.
■
■
●
●
●
●
■
●
●
●
●
●
●
The menu is activated only if the
‘Samsung Wireless LAN Adapter’
is connected.
■
Wireless Network Setup
U
Move
E
Enter
R
Return
Select a network 3/9
Search
Ad-hoc
sson
jee
AP_1
Ap_2
PBC
PIN
Security Key
Cancel
Press the PBC button on the access point.
Access Point Name : AP_1
Press OK After input TV’s Pin code in the access
point’s setup.
Access Point Name : AP_1
PIN Code : 12345678
CancelOK
Wireless Network Setup
n
Move
`~9
Number
E
Enter
R
Return
Security Key
Number
Lowercase
Delete
Done
A
H
O
V
B
I
P
W
C
J
Q
X
D
K
R
Y
E
L
S
Z
F
M
T
G
N
U
Wireless Network Setup
U
Move
E
Enter
R
Return
Select a network 3/9
Search
Ad-hoc
sson
jee
AP_1
Ap_2
PBC
PIN
None Security
Wireless Network Setup
n
Move
`~9
Number
E
Enter
R
Return
Security Key
Number
Delete
Done
A B C D E F
BN68-01900M-01Eng.indb 37 2009-04-13 �� 10:07:24