Samsung DVD-P247A TV DVD Combo User Manual


 
ENG-9ENG-8
6. STOP Button ( )
7. MENU Button
Brings up the DVD players menu.
8. RETURN Button
Returns to a previous menu.
9. REPEAT A-B Button
Use to mark a segment to repeat between A and B.
10. SUBTITLE Button
11. OPEN/CLOSE ( ) Button
To open and close the disc tray.
12. CLEAR Button
Use to remove menus or status displays from the
screen.
13. INSTANT REPLAY Button
This function is used to replay the previous 10
seconds of a movie from the current position.
14. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
15. PLAY/PAUSE Button ( )
Begin/Pause disc play.
16. INFO Button
Displays the current disc mode.
17. DISC MENU Button
Brings up the Disc menu.
18. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
This button functions as a toggle switch.
19. EZ VIEW Button
Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
20. REPEAT Button
Allows you to repeat play a title, chapter, track, or
disc.
21. ANGLE Button
Use to access various camera angles on a DVD.
22. AUDIO Button
Use this button to access various audio functions
on a disc.
DVD Function Buttons
1. DVD POWER Button
Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
Allows you to program a specific order.
4. STEP Button
Advances play one frame at a time.
5. SEARCH/SKIP Buttons ( / , / )
Allow you to search forward/backward through
a disc. Use to skip the title, chapter or track.
Tour of the Remote Control
1
11
12
13
14
15
16
17
18
19
20
21
22
2
3
4
5
6
7
8
9
10
Description-Rear Panel
COAXIAL
R
Pr Pb Y
L
S-VIDEO OUTVIDEO OUTANALOG AUDIO OUT
COMPONENT VIDEO OUT
OPTICAL
Rear Panel
1. DIGITAL AUDIO OUT JACKS
Use either a coaxial digital cable to connect to a
compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
2.
DIGITAL AUDIO OUT JACKS (DVD-P247A only)
Use either an optical cable to connect to a
compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
3. ANALOG AUDIO OUT JACKS
Connect to the Audio input jacks of your
television, audio/video receiver.
4.VIDEO OUT JACK
Use a video cable to connect to the Video input
jack on your television.
The Video Output in Setup Menu must be set to
Component (I-SCAN), SCART Output or
S-Video.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to
S-Video jack on your television for a higher
picture quality.
The Video Output in Setup Menu must be set to
S-Video.
6. COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with
Component Video in jacks.These jacks provide
Pr, Pb and Y video. Along with S-Video,
Component Video provides the best picture
quality.
If Component (P-SCAN) Video Output is
selected in Setup Menu, progressive scan mode
will work.
If Component (I-SCAN) Video Output is selected
in Setup Menu, interlaced scan mode will work.
7. SCART JACK
Connect to a TV scart input jack.
Impor
Impor
tant Note
tant Note
Consult your TV Users Manual to find out if your
TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
Users Manuals instructions regarding Progressive
Scan settings in the TVs menu system.
If Component (P-SCAN) Video Output is selected
in Setup Menu, Video and S-Video will not work.
See page 29 to get more information on how to
use the Setup Menu.
12 3 4 5 6 7